日本欧洲视频一区_国模极品一区二区三区_国产熟女一区二区三区五月婷_亚洲AV成人精品日韩一区18p

COMP30023 Project 2
Email client
Out date: 26 April 2024
Due date: No later than 5pm on Thursday 16 May, 2024 AEST
Weight: 15% of the final mark
1 Project Overview
The aim of this project is to familiarize you with socket programming. Your task is to write a simple email client
that downloads and parses email from a standards-compliant IMAP server.
Writing network code relies on conformance to standards, and so part of this project is to look up the relevant
standards (Requests for Comments, RFCs). You may also refer to online tutorials; if you do, then please mention
them in the comments of your code.
Your email client must be written in C or, if you get prior permission, in Rust. Submissions that do not compile
and run on a cloud VM may receive zero marks.
Blue text in this document is hyperlinked to resource material.
2 Project Details
Your task is to design and code a simple email client.
2.1 Program execution / command line arguments
The program should be be launched using the command:
fetchmail
-u <username> -p <password> [-f <folder>] [-n <messageNum>] [-t]
<command> <server_name>
Where <command> may be one of: retrieve, parse, mime, or list.
The options beginning with “-” can occur in any order, including between and/or after the 2 positional arguments.
The arguments in square brackets are optional.
All assessed output must be printed to stdout.
If you want to output debugging information, use stderr.
2.2 Logging on
Version 4rev1 of the IMAP protocol is specified in RFC 3501 and the below just describes one possible way that
it can be used to implement this project.
The basic steps to retrieving an email are:
• Create an IPv6 socket (or fall back to IPv4 if IPv6 is not supported) on port 143 (or a TLS socket on port
993 if you are doing the extension task and -t was specified) to the host named on the command line.
• Log in to the IMAP server using:
1tag LOGIN username password
where username and password are as specified on the command line.
Each command is prefixed with an identifier, or tag (such as A01). The tags should all be different within
one session. These are used for the server to report errors or completion of commands.
Each line ends with the standard internet end-of-line sequence rn (not the standard C end-of-line).
If this succeeds, you will receive a string starting with the tag, followed by a single space, (a case-insensitive)
OK, and another single space. For more details, refer to the response, response-done, and response
-tagged rules of the formal syntax.
If it fails, you should print the string Login failuren to stdout and exit with status 3.
You may assume that the LOGINDISABLED capability will not be advertised, and do not need to support
RFC5738: IMAP Support for UTF-8.
• Tell the system which folder you want to read from:
tag SELECT folder
If this succeeds, you will receive some untagged response lines starting with “*”, followed by a string
starting with the tag followed by OK .
If the folder doesn’t exist, print the string Folder not foundn to stdout and exit with status 3.
You should read from the folder INBOX if no folder is specified on the command line.
The next steps depend on which command is being executed.
2.3 Retrieve
If the command is retrieve, fetch the email, such as with the command:
tag FETCH messageNum BODY.PEEK[]
If messageNum (the message sequence number) was not specified on the command line, then fetch the last
added message in the folder (Hint: Take a look at the seq-number rule in the formal syntax).
If this succeeds, the response will be the contents of the email, including the headers.
For more details, refer to the response, message-data, and msg-att-static rules of the formal syntax.
If message with sequence number messageNum does not exist, then print the string Message not foundn
to stdout and exit with status 3 (apply this to parse and mime also).
Once you have retrieved the email, print the raw email to stdout and exit with status 0.
2.4 Parse
If the command is parse, print the following n-delimited output to stdout for the fetched email:
From: mailbox-list
To: address-list
Date: date-time
Subject: unstructured
You may get this information from the raw email, or by issuing more specific IMAP commands such as
BODY.PEEK[HEADER.FIELDS (FROM)] or ENVELOPE that explicitly fetch header fields.
Note that a header field body may be split over multiple lines using RFC 5322’s “folding” syntax. You must unfold
such lines before printing, so that each header is printed as a single line.
Not all emails have a Subject header; if it does not, then respond as if the subject were “<No subject>”.
Not all emails have a To header; if not, print an empty string in place of the value (with no space after colon).
Note that header field names are case insensitive.
Your mail client does not need to support RFC 6532: Internationalized Email Headers, or Obsolete Header Field
Syntax (but should not crash, if they are encountered; code should never crash).
Note that a line in the body can look just like a header line. How can you tell them apart?
22.5 MIME
If the command is mime, then the program should decode Multimedia Internet Mail Extension (MIME) messages
as follows, and print the plain ASCII version of the message.
MIME encoding (RFC 2045, RFC 2046) is used to encode attachments, and also to allow both an HTML and
plain text version of an email. In this project, it is introduced by headers of the form:
MIME-Version: 1.0
Content-type: multipart/alternative; boundary="boundary parameter value"
Your program is expected to match at the top level of a message:
• The MIME-Version header, with value of 1.0 (There will be no “comment strings”.)
• The Content-Type header, with multipart/alternative media type, and boundary parameter
The body of the email will then contain body parts separated by boundary delimiter lines like:
CRLF --boundary-parameter-value CRLF
where the boundary parameter value matches the value in the Content-Type header of the top-level message.
The final block is ended with a line:
CRLF --boundary-parameter-value--
The standard allows quite a general syntax for body parts, such as a range of encodings. You are not expected to
handle all these options.
Your program is expected to match and print the first UTF-8 text/plain body part:
• Content-Type: text/plain, with charset=UTF-8
• Content-Transfer-Encoding: quoted-printable | 7bit | 8bit
Note that headers may be folded, and parameter (boundary and charset) values may be quoted with double
quotes. The actual values do not contain any quotes, so the values can be obtained by simply ignoring any double
quote characters on the line.
Note that header field names, parameter names, charset parameter value, Content-Transfer-Encoding mechanism,
Content-Type media type and subtype are case-insensitive.
The RFC allows multipart entities to be nested, but that is not required by this project.
If the mime command is given, the output should consist only of the body area of the the first utf-8 text/plain
body part that was matched, with no further decoding.
If matching fails, your program should print a sensible error message and exit with status 4.
2.6 List
If the command is list, then print to stdout the subject lines of all the emails in the specified folder, sorted by
message sequence number. If the mailbox is empty, print nothing and exit with status 0.
The subject lines should be unfolded so that each is a single line, but does not need be decoded in any other way.
Output the message sequence number, followed by a colon and a space, followed by the body of the subject header
(not the initial Subject: or any additional leading or trailing whitespace). For example:
1: Recent Canvas Notifications
2: New in COMP30023: Mst Practise Exam
3: <No subject>
You can use the SEARCH command from RFC 3501 section 6.4.4, or the FETCH command from RFC 3501
section 6.4.5 with the range 1:*, or any other method you choose.
You may assume that the contents of the selected mailbox will not be changed during this list operation.
32.7 Stretch Goal – TLS using OpenSSL
For the stretch goal marks (included in the 15 marks), use transport layer security (TLS) instead of a plain TCP
socket when the -t option is specified on the command line.
This task is only for those aiming to get 15/15 for the assignment. If you think the assignment is too big, then
focus on the non-stretch goals.
If setting up the connection fails, provide meaningful output to stdout and then exit with status 2.
If implementing in C, you may find the following OpenSSL functions helpful.
SSL_library_init
SSL_load_error_strings
OpenSSL_add_all_algorithms
SSL_CTX_new
SSL_new
SSL_set_mode
SSL_CTX_free
BIO_*
These are explained at [https://www.openssl.org/docs/manmaster/man3].
You may also find the instructions at [https://wiki.openssl.org/index.php/SSL/TLS_Client]
useful. Make sure that you understand (and document) any code that you use.
Note that the test server will have a self-signed certificate, and so you must add the root certificate to your trust
store.
openssl s_client -showcerts -connect <host>:993 <<< "Q"
# Manually save the root certificate to a file named ca.crt
sudo cp ca.crt /usr/local/share/ca-certificates/
sudo update-ca-certificates
If you implement this extension, you can test your implementation of fetchmail against the IMAP server of an
actual email provider. It is suggested that you create a disposable account for this purpose.
For Gmail, You will need to get a Google app password, following the instructions at [https://support.
google.com/accounts/answer/185833]:
• Log in to the Google Account.
• Select ‘2-Step Verification’ from Security.
• After completing 2-Step Verification, select ‘App passwords’ at the bottom of the page.
• After generating, get a 16-character code that you can use at the authentication step.
3 Marking Criteria
The marks are broken down as follows:
Task # and description Marks
1. Correctly requests email message 2
2. Displays raw email (retrieve) 2
3. Displays headers (parse) 2
4. Displays text/plain version of the email (mime) 2
5. Lists email (list) 2
6. Safety 2
7. Build quality 1
8. Quality of software practices 1
Stretch goal. Transport layer security (TLS) 1
Code that does not compile and run on cloud VM will usually be awarded zero marks for parts 1–6. Use the Git CI
infrastructure to ensure your submission is valid. Your submission will be tested and marked with the following
criteria:
4Task 1. Correctly requests email message Your code correctly establishes a connection, navigates to the
specified folder and makes at least one of the requests (retrieve, parse, mime or list).
Task 2. Displays raw email Your code downloads the complete message, which may require multiple read()
calls. This should not result in any memory overflow problems, even if a large message is returned, by using
dynamic memory allocation (malloc). If dynamic memory allocation fails, the code can print an error message
and exit.
Task 3. Displays headers Your code correctly identifies the appropriate headers and displays them in the correct
order. For this task, you may assume that the listed headers will follow the limits defined in RFC 5322.
Task 4. Displays text/plain version of the email Your code correctly parses any MIME headers and
displays only the first text/plain version of the email.
Task 5. Displays list of email Your code correctly displays the list of email which is present in the selected
mailbox.
Task 6. Safety Your code should be robust to things like invalid command line arguments, failed connections,
improperly formatted mail.
Your code should not allow injection of IMAP commands through malicious command line arguments or email
contents.
Network code should never crash, even if the command line is invalid or the hosts on the other side behave poorly.
The sorts of bugs that cause involuntary termination, such as segmentation faults (memory errors) also introduce
security vulnerabilities. You must not implement any handlers for program error signals (such as SIGSEGV). It is
OK to print an error message and abort the program.
If interaction with the server fails at any point, an informative error message should be displayed. The program
may either attempt to continue, or exit cleanly.
Task 6 covers segmentation faults, but code that crashes with a segmentation fault may be marked down in other
tasks too.
For the purpose of assessment, use the following predefined status codes:
1. Command-line parsing error, argument validation failure (if implemented)
2. Connection initiation errors
3. Unexpected IMAP or server responses (e.g. unexpected disconnect, random characters)
4. Parse failure (e.g. Expected header is missing (optional), text/plain part not found)
5. Other errors
You do not need to apply a timeout; if the server becomes unresponsive, your code is allowed to hang.
Task 7. Build quality
• The repository must contain a Makefile that produces an executable named “fetchmail”, along with
all source files required for compilation. Place the Makefile at the root of your repository, and ensure
that running make places the executable there too.
• Make sure that all source code is committed and pushed.
• make clean && make -B && ./fetchmail <...arguments> should execute the submission.
• Compiling using “-Wall” should yield no warnings (C).
Compiling using “cargo build” should yield no warnings (Rust).
Do not suppress any default warnings inline.
5• Running make clean should remove all object code and executables.
• Do not commit fetchmail or other executable files. Scripts (with .sh extension) are exempted.
The mark calculated for “Build quality" will be visible on CI.
If this fails for any reason, you will be told the reason, and be allowed to resubmit (with the usual late penalty). If
it still fails, you will get 0 for Tasks 1–6 and the stretch goal. Test this by committing regularly, and checking the
CI feedback. (If you need help, ask on the forum.)
Task 8. Quality of software practices Factors considered include:
• Proper use of version control, based on the regularity of commit and push events, their content and associated
commit messages (e.g., repositories with a single commit and/or non-informative commit messages
will lose 0.5 marks).
• Quality of code, based on the choice of variable names, comments, formatting (e.g. consistent indentation
and spacing), and structure (e.g. abstraction, modularity).
• Proper memory management, based on the absence of memory errors and memory leaks.
4 Submission
All code must be written in C or Rust (e.g., it should not be a C wrapper over code in another language). You may
use the standard library of the chosen programming language.
You must not use or adapt any code or libraries relating to IMAP or Internet Messages.
You may link with the openssl library present on the system, or use any of the libc, openssl, opensslsys,
 and openssl-probe crates for the purpose of implementing TLS or (optionally) SASL Authentication
only. openssl must be dynamically linked. The openssl-src crate must not be included as a sub-dependency.
For Rust submissions, any invocation of cargo build must include the --frozen, --offline, and
--release options. A vendor rule must be defined in your Makefile, to vendor crates prior to offline
compilation. The vendor directory must be present in .gitignore, and must not be committed at any stage
of the git history. The vendor directory must not be removed by make clean. Cargo.lock files must be
committed. Unless otherwise approved, your crate should not rely on any custom build scripts. You may assume
that the latest stable version of Rust will be installed in the build environment.
You can reuse the code that you wrote for your other individual projects if you clearly specify when and for what
purpose you have written it (e.g., the code and the name of the subject, project description and the date, that can
be verified if needed) in references.txt.
If you import code from somewhere else, within the collaboration policy, there should be a commit that does
nothing but import that code, with a commit message saying “importing code from [reference]”. You should then
customise the imported code in later commits.
GitHub The use of GitHub is mandatory. Your submission will be assessed based using the code in your
Project 2 repository (proj2-〈usernames...〉) under the subject’s organization.
We strongly encourage you to commit your code at least once per day. Be sure to push after you commit. This
is important not only to maintain a backup of your code, but also because the git history may be considered for
matters such as special consideration, extensions and potential plagiarism. Proper use of git will have a positive
effect on the mark you get for quality of software practices.
Submission To submit your project, please follow these steps carefully:
1. Push your code to the repository named proj2-〈usernames...〉 under the subject’s organization,
https://github.com/feit-comp30023-2024.
Executable files (that is, all files with the executable bit that are in your repository other than .sh files)
will be removed before marking. Hence, ensure that none of your source files have the executable bit.
6Ensure your code compiles and runs on the provided VMs. Code that does not compile or produce correct
output on VMs will typically receive very low or 0 marks.
2. Submit the full 40-digit SHA1 hash of the commit you want us to mark to the Project 2 Assignment on
the LMS.
You are allowed to update your chosen commit by resubmitting the LMS assignment as many times as desired.
However, only the last commit hash submitted to the LMS before the deadline (or approved extension)
will be marked without a late penalty.
3. Ensure that the commit that you submitted to the LMS is correct and accessible from a fresh clone of your
repository. An example of how to do this is as follows:
git clone git@github.com:feit-comp30023-2024/proj2-<usernames...> proj2
cd proj2 && git checkout <commit-hash-submitted-to-lms>
Please be aware that we will only mark the commit submitted via the LMS. It is your responsibility to ensure
that the submission is correct and corresponds to the commit you want us to mark.
Late submissions Late submissions will incur a deduction of 2 marks per day (or part thereof). For example, a
submission made 1 hour after the deadline is considered to be 1 day late and carries a deduction of 2 marks.
We strongly encourage you to allow sufficient time to follow the submission process outlined above. Leaving it to
the last minute usually results in a submission that is a few minutes to a few hours late, or in the submission of the
incorrect commit hash. Either case leads to late penalties.
The submission date is determined solely by the date in which the LMS assignment was submitted. Forgetting to
submit via the LMS or submitting the wrong commit hash will result in a late penalty that will apply regardless of
the commit date.
We will not give partial marks or allow code edits for either known or hidden cases without applying a late penalty
(calculated from the deadline).
Extension policy: If you believe you have a valid reason to require an extension, please fill in the Project 2
extension request form available on the LMS at the earliest opportunity, which in most instances should be well
before the submission deadline. Extensions will not be considered otherwise. Requests for extensions are not
automatically granted and are considered on a case-by-case basis. You are required to submit supporting evidence
such as a medical certificate. In addition, your git history should illustrate the progress made on the project up
to the date of your request.
If you have a chronic condition or an AAP, please complete an extension request early, even if you hope not to
need it. This will allow us to spend more time helping people near the deadline instead of doing paperwork. If
you need special consideration, an extension may not be the best way to help you, especially if you would need a
long extension. When you apply, please think of other things we could do to help you to submit on time.
5 Testing
You will have access to several test cases (via an IMAP server – see Ed) and their expected outputs. However,
these test cases are far from exhaustive; they are mainly to avoid misinterpretation of the specification. Designing
and running your own tests is a part of this project. Your code will be assessed on these cases other cases that
you haven’t seen before. The unseen cases are not “trick” cases, but are chosen to reflect the fact that real world
programming tasks do not come with an exhaustive list of test cases.
Project 2 Repository: The project skeleton and sample outputs are available from:
feit-comp30023-2024/project2.
Continuous Integration Testing: To provide you with feedback on your progress before the deadline, we will
set up a Continuous Integration (CI) pipeline on GitHub with the same set of test cases.
Though you are strongly encouraged to use this service, the usage of CI is not assessed, i.e., we do not require CI
tasks to complete for a submission to be considered for marking.
The requisite ci.yml file has been provisioned and placed in your repository, but is also available from the
.github/workflows directory of the project2 repository linked above.
76 Team Work
Both team members are expected to contribute equally to the project. If this is not the case, please approach the
head tutor or lecturer to discuss your situation. In cases in which a student’s contribution is deemed inadequate,
the student’s mark for the project will be adjusted to reflect their lack of contribution. We will look at git history
when making such an assessment.
7 Getting help
Please see Project 2 Help module on LMS.
8 Collaboration and Plagiarism
You may discuss this project abstractly with your classmates but what gets typed into your program must be the
work of your group, not copied from anyone else. Do not share your code and do not ask others to give you
their programs. The best way to help your friends in this regard is to say a very firm “no” if they ask to see
your program, point out that your “no”, and their acceptance of that decision, are the only way to preserve your
friendship. See https://academicintegrity.unimelb.edu.au for more information.
Note also that solicitation of solutions via posts to online forums, whether or not there is payment involved, is
also Academic Misconduct. You should not post your code to any public location (e.g., GitHub) until final subject
marks are released.
If you use a small amount of code not written by you, you must attribute that code to the source you got it from
(e.g., a book or Stack Exchange) in both the comments and the git commit messages.
Do not post your code on the subject’s discussion board Ed, except in a Private thread.
Plagiarism policy: You are reminded that all submitted project work in this subject is to be your own work, as a
pair or individual. Automated similarity checking software will be used to compare submissions. It is University
policy that cheating by students in any form is not permitted, and that work submitted for assessment purposes
must be the independent work of the pair or student concerned.
Using git properly is an important step in the verification of authorship. We should see the stages of your code
being written, not just the finished product.
AI software such as ChatGPT can generate code, but it will not earn you marks. You are allowed to use tools like
ChatGPT, but if you do then you must strictly adhere to the following rules.
1. Have a file called AI.txt
2. That file must state the query you gave to the AI, and the response it gave
3. You will only be marked on the differences between your final submission and the AI output.
If the AI has built you something that gains you points for Task 1, then you will not get points for Task 1;
the AI will get all those points.
If the AI has built you something that gains no marks by itself, but you only need to modify five lines to get
something that works, then you will get credit for identifying and modifying those five lines.
4. If you ask a generic question like “How do I convert an integer to network byte order?” or “What does the
error ‘implicit declaration of function parse_command_line’ mean?” then you will not lose any marks for
using its answer, but please report it in your AI.txt file.
If these rules seem too strict, then do not use the AI tools.
These issues are new, and this may not be the best policy, but it is this year’s policy. If you have suggestions for
better rules for future years, please mention them on the forum.
Good luck!
請加QQ：99515681  郵箱：99515681@qq.com   WX：codinghelp